Lexmark Staple Finisher w/ 2/4-Hole Puncher, 3400 sheets
This unit supports A4, A5, A6, Executive, Folio, JIS B5, Letter, Legal, Oficio and Statement sizes. Paper (16 to 47 lb, 60 to 176 gsm), transparencies, card stock and labels may be used from this tray. Envelopes in sizes 7¾, 9, 10, B5, C5 and DL may also be used from this tray. Paper size, paper and tray-present and tray-low and tray-empty sensing are supported. The optional caster base may be required when the product is configured with the spacer or additional trays (1 to 4).
Internal Reference:
26Z0080
Website URL:
/shop/26z0080-lexmark-staple-finisher-w-2-4-hole-puncher-3400-sheets-13711
Bins 1 and 2 support various plain, recycled or bond papers and glossy
paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4,
JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.
The upper bin 1 supports up to 200 sheets of paper with hole punching.
Bin 1 has a full sensor.
The lower bin 2 supports up to 3200 sheets of paper with stapling,
hole punching and offset stacking. Each stapled set may contain up to 50
sheets for 4-position stapling (5,000 staples capacity). Bin 2
has a full sensor.
The standard output bin capacity is reduced to 100 sheets when using a
floor standing finisher.
The lower bin capacity is reduced when stapling
is utilised.
Hole punching and offset stacking are supported to Bin 2
only.
The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise
the printer or MFP to the correct height for use with the Finisher.
Kui sul on selle toote kohta küsimusi
siis võta ühendust meie konsultandiga ja ta annab sulle kõik vastused.